In this paper, recommended spiral passive micromixer was designed and simulated. spiral design has the potential to create and strengthen the centrifugal force and the secondary flow. A series of simulations were carried out to evaluate the effects of channel width, channel depth, the gap between loops, and flowrate on the micromixer performance. These features impact the contact area of the two fluids and ultimately lead to an increment in the quality of the mixture. In this study, for the flow rate of 25 μl/min and molecular diffusion coefficient of 1×10-10 m2/s, mixing efficiency of more than 90% is achieved after 30 (approximately one-third of the total channel length). Finally, the optimized design fabricated using proposed 3D printing method.

Education is a continually developing activity, it shapes the way an individual develops their attitudes, thoughts and behavior. Education is not just about being literate but it is an overall development of the person in every aspect of their lives. A society's educational system can be greatly linked to its culture as the culture that one is in have an affect on the type of curriculum the institutions will develop in order to cater to every individual of that particular culture. Education moulds and shapes a society and it is influenced by the culture of the particular country or society. The educational system acts as a point of reference for the society's needs and demands. The principles that dominate this article is culture and education are interrelated and interconnected. Every educational paradigm is influenced by the culture of the society in which it operates. This essay underlines the extensive connection between culture and education. As a result, the goal of this essay is to depict these features from a Philosophical-Psychological approach.

Artifacts are ubiquitous and influential in our world, but their nature and existence are controversial. Several theories have been proposed to explain the ontology of artifacts. Drawing on Popper's theory of three worlds, this paper suggests a metaphysics for artifacts along the line of a critical rationalist (CR) approach. This theory distinguishes between three realms of reality: the physical world (World 1), the mental world (World 2), and the world of objective knowledge (World 3). The paper argues that artifacts have different ontological components that correspond to these three realms, and that each component is real and causal. The paper shows how this perspective can account for the intentional and functional aspects of artifacts, as well as their dependence on plans that influence different realms of reality. The paper explains how this pluralistic ontology, compared to the rival theories, enables one to explain the relevant ontological problems of artifacts. The paper also explores how this proposal can lead to a research program encompassing a broader range of technologies, such as social artifacts. In sum, the paper suggests that Popper's three worlds theory provides a rich and comprehensive framework for understanding the metaphysics of artifacts.

Distributed Denial of Service (DDoS) attacks are among the primary concerns in internet security today. Machine learning can be exploited to detect such attacks. In this paper, a multi-layer perceptron model is proposed and implemented using deep machine learning to distinguish between malicious and normal traffic based on their behavioral patterns. The proposed model is trained and tested using the CICDDoS2019 dataset. To remove irrelevant and redundant data from the dataset and increase learning accuracy, feature selection is used to select and extract the most effective features that allow us to detect these attacks. Moreover, we use the grid search algorithm to acquire optimum values of the model’s hyperparameters among the parameters’ space. In addition, the sensitivity of accuracy of the model to variations of an input parameter is analyzed. Finally, the effectiveness of the presented model is validated in comparison with some state-of-the-art works.

The problem of personal identity among others may stem from the following question—what does be the person that you are, from one day to the next, necessarily consist of? The diachronic problem of personal identity raises question on the necessary and sufficient conditions for the identity of the person over time. The synchronic problem is grounded in the question of what features or traits characterize a given person at one time. To answer these questions, John Locke discarded the soul and the body as necessary and sufficient substances for personal identity over time. He accepted consciousness as the only criterion for personal identity; the only thing capable of remaining the same and preserving personal identity through change. Though Locke’s argument is somewhat clear and coherent but what remains vague and incoherent is embedded in the question—what exactly is consciousness? How and why should it be the basis or criterion for the determination of personal identity? Using the method of critical analysis, I argue that Locke’s choice of consciousness as the determinant of personal identity, though quite novel, is incoherent and vague. Secondly, Locke had already presumed and anticipated clearly though fallaciously the very thing he wishes to substantiate. I therefore conclude that Locke’s argument is just another way of trying to escape but inadvertently prolonging the difficulty of apparently articulating a distinction between the psychological approach and physiological approach to the problem of personal identity. However, in my submission, I propose the concept of the “other” as alternative approach— a sort of an extrinsic-intrinsic approach to the problem of personal identity.

In this research, in order to investigate the effect of the piezoelectric patch which is used as a sensor or actuator in rotating flexible structures such as a helicopter blade, the free vibrations of the rotating rectangular sheet with and without the piezoelectric patch have been presented. First-order shear deformation theory is considered for plate displacement and piezoelectric field. Considering the effect of Coriolis acceleration, centrifugal acceleration and centrifugal in-plane forces, the equations of motion are derived from Hamilton's principle and the electromechanical couple equation is obtained from Maxwell's equation. For piezoelectric, two electrical conditions, open circuit and closed circuit, which are used in sensors and actuators, respectively, have been considered. The equations are discretized with the help of the Numerical method of generalized differential squares and the matrices of inertia mass, eccentricity, Coriolis and stiffness matrix are obtained. Natural frequency values for beam and rotating plate have been compared in Abaqus software. Also, the values obtained from the Numerical solution in MATLAB have been verified with articles and ABAQUS, which have high accuracy. The effect of parameters such as hub radius, rotation speed, sheet thickness, aspect ratio, piezoelectric patch thickness and applied voltage on the natural frequency of the system has also been investigated.

Plastic hinge properties play a crucial role in predicting the nonlinear response of structural elements. The plastic hinge region of reinforced concrete normal beams has been previously studied experimentally and analytically. The main objective of this research is to evaluate the behavior of the plastic hinge region of reinforced concrete deep beams and its comparison with normal beams through finite element simulation. To do so, ten beams contain six deep beams, and four normal beams, under concentrated and uniformly distributed loading, are investigated. Lengths in the plastic hinge region involving curvature localization, rebar yielding, and concrete crushing zones are studied. The results indicate that the curvature localization zone is not suitable for the prediction of plastic hinge length in reinforced concrete deep beams. Based on the results it can be stated that in simply supported normal beams the concrete crushing zone is focused on the middle span, but in simply supported deep beams by creating a compression strut between loading place and support, the concrete crushing zone spreads along the compression trajectory. The rebar yielding zone of simply supported beams increases as the loading type is changed from the concentrated load at the middle to the uniformly distributed load.

در عصر ارتباط فرهنگ های متکثر با یک دیگر یکی از مسئولیت های فیلسوفان اخلاق جلوگیری از نزاع های اخلاقی است تا فرهنگ های مختلف، با به رسمیت شناختن یک دیگر و با تکیه بر اشتراکات بشری، روابطی اخلاقی و عدالت محورانه را در سراسر جهان نظریه پردازی کنند. در مراودات فرهنگیِ فراگیر ازطریق فضای مجازی، تبعیض های نژادی، قومی، و جنسیتی امنیت جهانی را به خطر خواهد انداخت؛ ازاین رو باید به نگرش های وحدت بخش اخلاقی اعم از دینی و غیر دینی اندیشید که مداراگر، بردبار، و اهل تعامل با دیگران هستند. در این مقاله، کتاب فلسفة اخلاق: رویکردی تکثرگرا به نظریة اخلاقی، اثر لارنس ام هینمان، در سه بخش جداگانه، تبیین، تحلیل، و نقادی شده است. دیدگاه علمی و غیرجانب دارانة نویسنده، روش منطقی وی در پاسخ به مسائل موردبحث، و نظام سؤالاتی که در پایان هر فصل اطلاعات خوانندگان را ارزیابی می کند از مزایایی است که نگارندة مقاله به دلیل وجود آن ها این کتاب را منبعی مناسب برای واحدهای دانشگاهیِ فلسفة اخلاق معرفی می کند و ترجمة این اثر را به فارسی پیش نهاد می کند.

Due to the importance of Tabriz in various historical periods after the Mongol’s invasion to the end of the Qajar period, as continuously being the capital city or the residence city of the prince, entrance to this city has been reflected in various reports. Most of the foreigners who entered Iran from European countries came from Caucasus Road to Tabriz and reported many buildings on their way. Moreover, this road was one of the most significant roadways for Caravans on the Silk Road, where various residential buildings have been constructed. Alaki caravansarai is one of the most important roadside accommodations in Northwest Iran, and so many reports about it and the quality of its façade decorations can be traced in the travelogues of foreigners who traveled to Iran. Its vastitude and elegant entrance gate nevertheless, this building has unfortunately been neglected and was about to be ruined in the 19th century and afterward. However, the beauty of its entrance gate has gained the attention of many people and has been reported in many sources. Based on the ornaments used, recent sources in the history of architecture have estimated its date to the 12th century and Ilkhanid Abū Saʿīd Bahādor Khan and the Timurid period. These sources based their estimation only on the type of ornaments used on its entrance gate and its probable that the existence of dated artworks of the Ilkhanid period nearby, such as the Mihrab of Marand’s Jame Mosque, has influenced this speculation. This article aims to meticulously study this building in various travelogues, al-Wqafīyya al-Rashīdīyya, and other sources in the history of architecture and discusses the ornament types used and their history. The detailed study of the documents and sources indicated that this building could belong to the presidency period of Ḵᵛāja Rašid-al-Din Fażl-Allāh, and based on his emphasis to establish this building, can be dated 1297-1309. The ornaments, moreover, indicate the transient period from brickwork to tilework which happened in the late 13th and early 14th centuries